GprsTerminal+ is a dual band industrial GSM modem for the transfer of asynchronous and packet data, SMS and faxes in GSM networks.
Built-in EIA-RS232 com port, 300 to 115200 baud.
Control by ITU, GSM, GPRS and Custom AT commands.
Internal or external antennas option.
Its performance bandwidth and the industrial housing make it easier to quickly implement new applications in areas such as telemetry, telematics and remote control.
Output Power
- Class 4 (2W @ 900 MHz)
- Class 1 (1W @ 1800 MHz)
Power Supply
- 8÷40 VCC polarity independent
- 6÷28 VCA
- < 30 mA @ 12 VDC in standby mode
- < 100 mA @ 12 VDC in communication mode
- < 1 A @ 12 VDC max peak current
- Optional NiMH backup battery
Data interface
- RS-232, 9 pole 2,5mm2 (AWG14) screw terminals
- 300…115200 BIT/s
- 7/8 data bit, 1/2 stop bit, 1 parity bit
- Software handshake , Hardware handshake
Audio Interface
- RJ11, 4 pin modulare jack (internal)
Voice
- Telephony, Emergency calls
- Full, Enhanced Full, Half e Adaptive Multi Rate
- Echo cancellation and noise reduction
- Full duplex handsfree
- Dual Tone Multi Frequency Function (DTMF)
GSM Data/Fax
- async, transparent / non transparent up to 14400 bps
- Automatic fax group 3 (Class 1 and Class 2)
- MNP2 error correction / V.42bis data compression
GPRS Packet Data
- GPRS Class 10, Class B
- PBCCH (Packet Broadcast Control Channel) support
- Coding schemes: CS1 to CS4
- Optional embedded TCP/IP stack
SMS
- Text and PDU
- Point to point (Mobile Terminated / Mobile Originated)
- Cell Broadcast
GSM Supplementary Services
- Call Forwarding, Barring, Waiting and Hold
- Multiparty
- Calling Line Identity
- USSD (Unstructured Supplementary Services Data)
Other Features
- Real Time Clock
- Alarm management
- SIM Toolkit Class 2
- SIM, network and service provider locks
- UCS2 character set management
AT Commands
- GSM 07.05 and 07.07 AT commands
- enhanced custom AT commands
Additional Protocols
- TCP/IP
- POP3
- SMTP
- FTP
Enclosure
- DIN EN-50022 rail, 4 modules, 71x90x58 mm
- polycarbonate, self-extinguish UL94-V0
- weight: 200 g
- operating temperature: -20÷55°C
- relative humidity: 5-95% non-condensing
- degree of protection: IP40 (EN-60529/IEC529)
Wiring
The EIA-RS232 interface is implemented as a 9 pole screw connector. The RJ11 modular jack for audio interface is located under the front cover.
EIA-RS232 DB9 PINOUT
Screw terminal are suitable for industrial environment. Conversion to standard DB9 male socket is shown.
AUDIO PLUG PINOUT
Standard handset
- Microphone in –
- Speaker out +
- Speaker out –
- Microphone in +
Different versions
- GprsTerminal+A – Embedded antenna
- GprsTerminal+X – External antenna
- GprsTerminal+AB – Embedded antenna, battery back-up
- GprsTerminal+XB – External antenna,battery back-up
User guide: B1010 en 0907 – GsmGprsTerminal+